PLEASE LOOK AT LAB LOCATION LIST AT THE END OF THIS ARTICLE.

Basic semen analysis is also known as a sperm count test. A semen analysis measures the viability and health of male sperm. Semen is the bodily fluid that contains sperm (and other sugars and proteins) that is released during ejaculation.

Semen analysis is used to measure three major sperm health factors:

  • Quantity of sperm
  • Shape of the sperm cells
  • Sperm motility (movement of the sperm)

Doctors will often order two or three separate sperm analyses to get an accurate idea of sperm health. Sperm counts may vary on a daily basis, so these tests should be performed at least seven days apart over the course of eight to twelve weeks. Your doctor should use the average of the sperm analysis results to determine your fertility.

How Ejaculation Affects Semen Analysis

Certain factors can result in an inaccurate semen analysis. The most critical is ejaculating less than three days before the test. Providing a semen sample less than three days after the last ejaculation will result in both a lower semen volume and total sperm count (1).

The testicles continually produce sperm cells which are stored in the epididymis; a long tubular structure that exists for this purpose. Ejaculation empties the epididymis, and it can take two to three days for new sperm to refill it.

This issue doesn’t mean that abstaining for a longer period is better – sperm cells only last about three weeks before dying and breaking down in the body. Ideally, a man should abstain from ejaculation for between three and five days for the most accurate results.

Heat Affects Sperm Analysis Results

Human sperm is very sensitive to heat exposure; it’s the reason why the testicles are the only glands located outside of the body. Even brief exposure to heat can result in premature sperm cell death that will reduce the sperm count and motility of the sample you provide for testing (2).

To avoid over-heating your sperm, you may:

  • Avoid hot baths or soaking in a hot tub
  • Wearing tight underwear (try wearing boxer shorts or without underwear)
  • Keep the laptop off your lap
  • Avoid sitting for extended periods

Experiencing a fever may also reduce the quality of the sperm sample as will prolonged exposure to high heat – if you’ve experienced any of these circumstances it may bear mentioning to your doctor.

The Semen Analysis, Basic test has very specific collection requirements.

  • The customer should observe at least 2 days but not more than 7 days of sexual abstinence before producing the specimen.
  • Specimens should be collected without the use of any lubricants in a container procured from the testing site.
  • Specimens collected in a condom are not acceptable.
  • This test requires a fresh specimen; therefore, this procedure is available only at sperm testing facilities.
  • The customer should bring their order requisition with them to the lab.

Some lab locations will have private collection rooms or allow the use of a public restroom. Others will require that the specimen be collected offsite and taken to the lab. For specimens which are not collected at the lab site:

  • The specimen must be taken to the lab no more than 30-45 minutes after collection.
  • The specimen should be kept in a pocket near the body to maintain temperature while being transported to the lab.

Other Causes of Inaccurate Sperm Analysis

There are environmental and lifestyle factors that will negatively impact the semen analysis.

  • Emotional stress, including the stress caused by infertility, could interfere with the hormones needed for the testicles to produce sperm (3).
  • Alcohol and drug consumption (cocaine, marijuana) may reduce testosterone levels resulting in decreased sperm production (4).
  • Obesity can diminish testosterone levels and cause physical changes that reduce the quantity and quality of sperm (5).
  • Tobacco use may have a negative impact on sperm quality, quantity, and motility (6).
  • Mistakes made during the collection process can cause unreliable results; spillage, contamination of the sample, and failing to seal the container properly may all affect semen analysis results (7).
  • Exposure to heavy or toxic metals like lead, mercury, and aluminum can reduce the quality of a sperm sample (8).

Interpreting the Results of Semen Analyses

After the semen sample is collected, test results are usually ready within one day to one week. When the doctor reviews sperm analysis test results, he/she considers several factors. When an analysis is done post-vasectomy, the doctor will look for the presence of sperm. But when semen analysis is performed to check for fertility issues, it’s a much more in-depth process (9).

To check fertility, the doctor will consider each of the following results (9):

  • pH: The pH level should be between 7.2 and 7.8 in a healthy semen sample. A pH level above 8.0 may indicate that the donor has an infection. A pH level less than 7.0 could mean that the semen sample has been contaminated or indicate blocked ejaculatory ducts (10).
  • Sperm density: The sperm density in a healthy semen sample should fall between 20 million to well over 200 million. This result is also known as sperm count. If sperm density is low, then conception could be harder to achieve (9).
  • Appearance: Semen should appear from whitish to gray and opalescent. Semen with a red-brown tint might indicate the presence of blood, while semen that is yellowish could mean jaundice (9).
  • Volume: A normal sample volume should be more than 2 milliliters. Low semen volume might mean there are too few spermatozoids present to fertilize an egg. Excess semen volume may mean that sperm are too diluted for conception (9).
  • Sperm shape: If greater than 50 percent of sperm are abnormally shaped, it may indicate reduced fertility (9).
  • Motility: Sperm motility (movement) is essential to fertility because the sperm needs to travel to fertilize the egg. Sperm is rated for movement on a scale of 0 to 4. Zero means that there is no movement present, and a score of three or four represents good movement (9).
  • Liquefaction: Semen should take 15 to 30 minutes to liquefy. Although semen is initially thick, its ability to turn to a watery consistency helps sperm to move. If semen doesn’t liquefy in 15 to 30 minutes, fertility could be affected (11).

References

1) Pei K, Xu Y, Jia M. Effect of successive ejaculation on semen analysis parameters in normal men. Zhonghua Nan Ke Xue. 2004 Sep;10(9):667-70.

2) Pérez-Crespo M, Pintado B, Gutiérrez-Adán A. Scrotal heat stress effects on sperm viability, sperm DNA integrity, and the offspring sex ratio in mice. Mol Reprod Dev. 2008 Jan;75(1):40-7.

3) Nargund VH. Effects of psychological stress on male fertility. Nat Rev Urol. 2015 Jul;12(7):373-82. doi: 10.1038/nrurol.2015.112. Epub 2015 Jun 9.

4) MUGDHA KULKARNI, CATHERINE HAYDEN AND OLIVER KAYES. Recreational drugs and

male fertility. Trends in Urology & Men's Health Volume 5, Issue 5, Version of Record online: 22 SEP 2014.

5) Katib, Atif. “Mechanisms Linking Obesity to Male Infertility.” Central European Journal of Urology 68.1 (2015): 79–85. PMC. Web. 26 Nov. 2017.

6) Sunanda, Priyadarsini et al. “Prevalence of Abnormal Spermatozoa in Tobacco Chewing Sub-Fertile Males.” Journal of Human Reproductive Sciences 7.2 (2014): 136–142. PMC. Web. 26 Nov. 2017.

7) Taylor, Patrick J., and Renée H. Martin. “Semen Analysis in the Investigation of Infertility.” Canadian Family Physician 27 (1981): 113–116. Print.

8) Julia J. Wirth,Renée S. Mijal. Adverse Effects of Low-Level Heavy Metal Exposure on Male Reproductive Function. Systems Biology in Reproductive Medicine Vol. 56 , Iss. 2,2010.

9) Vasan, S. S. “Semen Analysis and Sperm Function Tests: How Much to Test?” Indian Journal of Urology : IJU : Journal of the Urological Society of India 27.1 (2011): 41–48. PMC. Web. 26 Nov. 2017.

10) Harraway C, Berger NG, Dubin NH. Semen pH in patients with normal versus abnormal sperm characteristics. Am J Obstet Gynecol. 2000 May;182(5):1045-7.

11) Liu FX, Su DL, Zhu GY. Abnormal semen liquefaction and seminal plasma lipoprotein (a). Zhonghua Nan Ke Xue. 2013 Mar;19(3):247-50.

THESE ARE THE ONLY LAB LOCATIONS FOR THIS TEST:

AZ 1950 E SOUTHERN AVE STE 101 TEMPE, AZ 85282

Phone: 480-491-4161

Fax: 480-730-5922

Hours: MONDAY-FRIDAY 7:00AM-4:00PM SATURDAY 9:00AM-1:00PM SEMEN TESTING 9:00AM-2:30PM MON-FRI ONLY

AL 2022 BROOKWOOD MEDICAL CTR DR STE 401 HOMEWOOD, AL 35209

Phone: 205-877-5167

Fax: 205-877-5171

Hours: MON-FRI 7:30AM-5: 30 PM

FL Baptist Health of Northeast Florida: 800 Prudential Drive Jacksonville, FL 32207

Phone: 904-202-2006

Must call to make arrangements. Patient must arrive on premises before 1 PM M-F for collection; otherwise, the collection must be within one hour and remain at body temp for drop off. Registration is required through the hospital. Location of the Main Lab on the first floor of the main building.

FL 5610 W LA SALLE ST TAMPA, FL 33607

Phone: 813-289-5227

Fax: 813-286-2787

Hours: M-FR 7:00A-4:00P DRUG SCREENS 8:30A-3:30P SEMEN 8:00A-1:00P

FL 3990 SHERIDAN ST 109 110 HOLLYWOOD, FL 33021

Phone: 954-966-3890

Fax: 954-966-3899

Hours: M-F 7:00A-3:30P DRUG SCR M-F 9:30A-3:00P SAT 7:00A-12:00P SAT NO DRUG SCR

GA 1462 W. MONTREAL RD STE 114 TUCKER, GA 30084

Phone: 770-934-6743

Fax: 770-934-9161

Hours: MONDAY-FRIDAY 8:00A-5:00P OTS M-F 9A-4P LUNCH 1P-2P MEDICAL BUILDING NEXT TO THE OLD BP THIS SITE PERFORMS FINGERPRINTING

NV Nevada 2475 S Burmingham Ave 325, 89119

MO Missouri 13665 Lake front Dr Bld B 63045

CA The LabCorp Monrovian Stat Lab

605 E. Huntington Ave. Suite 29 Monrovia, CA 91016

Phone: 626-471-3500 ext 4023

M-F 10am -4pm Appointments required

TX Houston 7207 GESSNER DR HOUSTON, TX 77040

Phone: 713-561-4453

Fax: 713-856-4377

Hours: M-F 8-1230PM 130-330

TX Dallas 1106 ALSTON AVE SUITE 250 FORT WORTH, TX 76104

Phone: 817-927-2830

Fax: 817-927-2846

Hours: MON-FRI 6:30-5:30 SAT 8:00-12:00 DRUG SCREENS 8:00-4:30 SAT NO DRUG SC.

TX Corpus Christi 1521 S Staples Bld 103 78404